Ballast: Metal Halide 200-250W 85-265V AC / 120V-350V DC bipolar
SKU: EB250HSD
The ballast is intended to drive the following lamp types:
OSRAM HSD 200/60, HSD 250/60, HSD 250/78, according to OSRAM FO GL-61
Philips MSD 250, MSD250/2
General Electric CSD250/2 SE
According to constant power operation with maximum lamp current limit there are similar lamp types of various lamp manufacturers that are suitable.
Input and General Specifications*:
Input Voltage: Universal input 85 V - 264 V AC RMS, 45 Hz - 80 Hz,
120 V - 350 V DC bipolar
Input Current (85 V Line): Max. 4 A during operat
Operating Temperature: -25 °C to 85 °C / Safety Switch 100 °C +/- 5 °C
Automatic restart at approx. 70 °C
Efficiency (85 V Line): > 88 %
Nominal Power Output PL : 200 W / 250W depending on lamp type
150 W - 300W adjustable by factory and depending on voltage input.
Lamp Current Mode: Square wave, duty-cycle D = 50 %,
Frequency f = approx. 150 Hz
Ignition: External starter IG250UW
AC Mains Harmonics: According to EN 61000-3
Mechanical, Dimensions: Open frame with mounted PCB
160 mm (L) x 100 mm (W) x 44 mm (H)
Cooling: Heat sink must be cooled by forced air flow or additional heat sink, losses depending on input voltage, lamp power and operating conditions.
Please Contact Us for information about purchasing this product
