Ballast: Metal Halide 150-400W 85-264V AC
SKU: EB250G21
Electronic ballast module with PFC, EMI filter and fuse for mains input range of 85 – 264 VAC. Flicker-free constant power operation with higher lamp service time, increased light intensity and efficiency in comparison to conventional magnetic ballasts.According to constant power operation with maximum lamp current limit the ballast is capable to drive Hot re-strike metal halide discharge lamp types of various lamp manufacturers which are within power range of 150 to 400 W (depending on input voltage), and 10 A maximum lamp current. Set at factory.
Input and General Specifications*:
Input Voltage: Universal input 85 V - 264 V AC RMS, 45 Hz - 80 Hz,
120 V - 350 V DC bipolar
Input Current (85 V Line): Max. 4.4 A during operation
Operating Temperature: -25 °C to 85 °C / Safety Switch 100 °C +/- 5 °C
Efficiency (85 V Line): > 87 %; typically > 90% at full load, nominal line voltage
AC Mains Harmonics: According to EN 61000-3-2
Safety Standards: According to EN 60950
EMC Emission, Immunity: According to EN 55022, EN 61000-4-4/-5;
Additional filter depending on final application
Mechanical, Dimensions: Open frame with mounted PCB
160 mm (L) x 100 mm (W) x 44 mm (H)
Optional: Black anodized enclosure with heat sink
Lamp Current Mode: Square wave, frequency f = approx. 150 Hz
For additional inormation please contact us.
